Fluid Transfer System - WHITE


Use this 21 gallon system to remove mixture out of your MistAway Gen 1.3 before winterizing your system.

Turn the pump one way to extract (draw) or turn the pump the opposite way to fill.

FREEZING weather can ruin insecticide.

Move your mixture to a non-freezing location. Return the safely stored mixture back into your MistAway Gen 1.3 when summer weather returns.

INCLUDES the cart, pump, hose, and TWO 10.5 gallon heavy duty containers with caps and shipping.


Container dimensions: 11.5" x 11" x 32" (each)


This high quality 21 Gallon system was designed for a variety of fluid and fuel transfer applications including but not limited to the Marine, ATV, Automotive, and Agricultural industries.

Pump or draw (siphon) up to 8 gallons per minute with the included pump.

This system offers 21 gallons of capacity and is easily transported with the purpose-built cart.

The extraction system is incredibly durable, built to last, and will get the job done fast, safe, and easy. The full system includes a Professional Model Pump, (2) 10.5 gallon containers, hose, and the cart.

Fills or empties one 10.5 gallon can in under 90 seconds.
Pump offers double-seal technology that holds up with all types of fluids, even the harshest chemicals.
Pump hose offers industry-leading safety tether which attaches to a vessel or vehicle to ensure hose stays in fluid opening, eliminating spillage.
Each container holds 10.5 gallons of fluid Containers are dual handle for ease in transport, grip, and handling.
Container is rotationally-molded which gives additional wall thickness throughout, making it ultra-durable and long-lasting.
Containers have molded-in, female brass insert, combined with male vent valve to provide ample airflow when utilizing the Flo-Fast Pump Versa Cart includes (2) 12-inch tall tires and wheels that are solid rubber, eliminating any risk of the tires going flat.
The cart has heavy-duty, 15 inch wide steel, detachable load plate that is secured with pin and cotter key.
The cart includes a telescoping handle, (2) wire forms that slide within the aluminum block, and a solid steel axle with 3 inch wide footplate- utilized to tip-back and set down your container.


Safety Information


Steps the operator must take before Pumping or Drawing any volatile / combustible fluid
If you choose to pump or draw any type of flammable liquid do not use this pump or system around any flame or any type of electrical motor or devise that may cause a spark or static spark.
Always make sure the pump and the container it is in, is placed on the ground before pumping or drawing any fluid.
Apply static wire clamp to the filler opening to reduce the risk of static.
Do not transfer any fuel with engine running, hot exhaust can ignite fuel.
Make sure the squeeze clamp is applied before transferring fluid. The squeeze clamp is to make sure the hose will stay in the filler opening.
Always keep the hose in contact with the filler opening. (After you have applied the squeeze clamp to the unit that you are pulling fluid from or pumping fluid into, the hose will stay in contact with the filler opening, therefore dissipating any static build up from the pump or system.)
If fuel is being transferred do not smoke or place the pump or system by any type of flame.
Steps the operator must take when fluid transfer is complete
After a fluid transfer operation, carefully raise the line out of the fluid opening and let the fluid drain back into the system container. Do not set the hose down until all of the fluid has drained back into the container.
To eliminate any person from pumping fluid accidentally DO NOT store the pump in any type of portable jug. Always put the pump and system in a safe area where children / others do not have access to it.

Children must not use the portable fluid transfer pump and system.
Do not transport the pump while it is in the utility jugs.
After a fluid transfer operation, always remove pump from container and place the cap on the utility jug.
Do not allow individuals under licensed age to use the pump or system.
If you choose to use with any type of volatile fluid like gasoline or methanol or any harmful chemical, do not inhale vapors.
If any component breaks on the portable fluid transfer pump or system, do not use until you have replaced all of the broken components.
When filling containers at a gas station always place the container on the ground and never fill a container when it is in a trunk, in the bed of a truck, in a trailer, or on top of a vehicle. Do not overfill the container beyond manufacturer’s specified levels to allow for fluid expansion.
You can only use the pump on industry standard large mouth jugs.
Do not use the pump on any container that does not fit the pump.
When pumping or drawing fluid with the pump, you must properly open the vent for a proper venting system. Pouring from these containers can be dangerous and is not recommended.
Do not store jugs outside or in the sunlight
If you are using the pump with fluids that do not lubricate the pump, over time you may have to prime the pump if you are trying to draw fluid with a dry pump.
You may need to prime the pump if you are trying to draw or suck fluid from more than 5 feet away. (Each pump comes with 5 feet of hose)
The 5 foot accessory extension is for pumping purposes.
If you are pumping or drawing at a rate more than 60 revolutions per minute you run the risk of over pressurizing the pump.