NOTE: This tubing is NOT used in normal MistAway nozzle circuits, use our 1/4" tubing instead. Tubing is measured by O.D. (outside diameter).
This 3/8" Tubing - Black (25' coil) tubing can be used for:
- Used for the water supply to a Tankless MistAway Gen III+ between the house hose bib and the system unit's 3/8 inline water filter.
- Use for distance runs over 25' without nozzles. Each end of the tubing will require one of these and one of these, total 4 pieces. Long runs between nozzles over 25' use this tubing to reduce friction loss as in the smaller tubing.
- To boost pressure mid-length in long straight runs. If a multiple of 100' is required for that use we will cut in one full length. Example: 70 nozzle circuit is approximately 700 feet long, thus halfway is 350 feet so it would require 4 of these 100s but it is cheaper to buy a full 500' roll at that point.
- Nozzle circuits using "SLIMLINE BIG-TUBE TEE-NOZZLES" use this 3/8" tubing, but typical 1/4" Slimline or Hago nozzlesDO NOT use this item.
THIS IS NOT NORMAL SIZE NOZZLE CIRCUIT TUBING. THIS IS SPECIAL (LARGE) SIZE TUBING FOR OTHER USES.