Learn how to install your MistAway mosquito misting system.
Installing and maintaining your MistAway system is an easy job. Just like other small household projects it can be enjoyed! All summer long there is little to do since refills are typically months apart for most installations. Once you've installed your system you'll start it annually in the springtime when certain there will no longer be any freezing temperatures just follow the winterization procedure.
With the Gen III+ a refill can be completed in about two (2) minutes, just snap out the old bottle and in with the new. Tell the controller it has a new bottle, that's it!
With the Gen 1.3 a refill takes about 20 minutes depending on the flow you get out of your garden hose and the time it takes to find a hose connect it and get it laid out. You'll fill the 55 gallon drum about half way, open a 64 ounce bottle of juice and dump it in the drum. Continue filling the drum to the top with water. When full, tell the controller the system has been refilled. The mistAway doesn't use floats or other mechanical devices to determine the level, it is a calculation in the controller.
Links - How to install a MistAway system:
HOW TO INSTALL A MISTAWAY SYSTEM -PART 1
HOW TO INSTALL A MISTAWAY SYSTEM -PART 2
Hover your mouse over LEARNING CENTER on the main menu for more articles...
